The cutting-edge wireless control system gives Antari W series a simple setting and operation interface. Additionally, the state-of-the-art heater design upgrades the W Series fog machines to a higher level in terms of good quality fog and energy efficiency. In conclusion, Antari W Series bring users to a professional scene in an easier method.
● Intelligent Wireless Control System
Each machine comes with a set of wireless receiver and transmitter as standard controller. The working distance of wireless
control is 50 meters in open area.
● Opto-electronic Fluid Sensor
When the fluid recipient runs dry, the fluid sensor stops pumping automatically to protect pump from burning.
● More Efficient New Heat Exchanger Design
It can generate drier fog with smaller particles.This leads to a fairly low fog fluid consumption.Compare to the equivalent power
consumption heat exchangers, the same quantity of fog fluid in W series can produce 20% more fog than others.
● New Advanced PCB (Printed Circuit Board)
Design The new system can control temperature precisely and rule out the influence from outside environments as much as
possible to make W series fog machines be able to work stably between – 20 and 60 degree Celsius.
|– Input voltage|
– Rated power
– Operating time
|AC 100-120V, 50 / 60Hz 6.7A|
AC 220-240V, 50 / 60Hz 3.5A
2 minutes (approx.)
Antari FLG Heavy Fog Fluid
Antari FLR Light Fog Fluid
60 mins at max. output
0 °C – 40 °C (32 °F-104 °F)
3,000 ft³/min (85 m³/min)
L315 W128 H218 mm
(L12.40 W5.04 H8.58 inch)
3.8 kg (8.38 lbs)