Audio-Technica AT-LPW50PB Turntable (Black)


2 in stock

The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.

We consider this to be the next step up to the already popular AT-LP60XBT with it’s adjustible tonearm, replaceable styles, and heavy-duty plinth. Note Bluetooth capability from the LP60XBT is missing from this model.

Designed for a Higher Level of Listening

The AT-LPW50PB is equipped with a straight, matte-finish, carbon-fiber tonearm and comes with an AT-HS4 universal ½”-mount headshell and a special black version of the versatile AT-VM95E Dual Moving Magnet phono cartridge.


TypeBelt-drive manual turntable
MotorDC servo with Active Speed Stabilization
Drive MethodBelt drive
Speeds33-1/3 RPM, 45 RPM
Turntable PlatterDie-cast aluminum
Wow and Flutter< 0.15% WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio>60dB
Output LevelPre-amp “PHONO”: 4.0 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain35 dB nominal, RIAA equalized
Power Supply Requirements100-240 V, 50/60 Hz, 0.5 A Max.
DimensionsWith dustcover: 420.0 mm W x 356.0 mm D x 126.0 mm H
Without dustcover and hinges: 420.0 mm W x 356.0 mm D x 114.0 mm H
Weight5.56 kg without dust cover
Tonearm typeStatic balanced straight carbon tonearm
Effective arm length223.6 mm
Overhang18.6 mm
Tracking error angle<2 degrees
Applicable cartridge weight12-17 g
Stylus pressure adjustment range0-3 g
Replacement StylusAT-VMN95E BK
Accessories IncludedDust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95E stereo cartridge (black), 45-RPM adapter, RCA audio cable (approx. 1.0 m), AC adapter (approx. 1.5 m), Dust cover hinges